Brief Introduction:
The semi-gantry crane with electric hoist is a kind of small and medium-sized rail operation type hoisting machinery and it should proper matching use CD1 and MD1 type electric hoist. The specialized reducer with lower girder can make the inside work space bigger with lifting capacity between 1-16 ton, span between 5-20 meters and work environment -20 to 40 degree centigrade. The semi-gantry crane with electric hoist is the common crane, and it is usually used in machine shop to carry materials. The crane has two operation modes including control on ground and remote control.
Technical data:
| Main Parameters List | ||||||
| Crane Traveling Mechanism | Traveling Speed(m/min) | 20 | 30 | 45 | 60 | |
| Ratio | 58.95 | 39.42 | 26.51 | 19.44 | ||
| Motor | Type | Cone Squirrel-cage | Cone Squirrel-cage | |||
| Power(kw) | 0.8*2, 1.5*2, 2.2*2 | 1.5*2, 2.1*2 | ||||
| Rotary Speed(r/min) | 1380 | 1350 | ||||
| Hoist Lifting Mechanism and Traveling Mechanism | Trolly | |||||
| Lifting Speed(m/min) | 8/0.8, 7/0.7, 3.5/0.35 | 8, 7, 3.5 | ||||
| Span(m) | 7.5-28.5 or assigned | |||||
| Lifting Capacity(t) | 1-32 | |||||
| Lifting Height(m) | 6, 9, 12, 18, 24, 30 | |||||
| Traveling Speed(m/min) | 20, 30 | |||||
| Motor | Cone Squirrel-cage | |||||
| Work Duty | Intermediate Jc=25% | |||||
| Power Supply | 380V 50HZ 3P | |||||
| Wheel Diameter | Φ270, Φ400 | |||||
| Trail Width | 37-70 | |||||
Safe Devices:
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we
provide are not only the electric protective devices or alarm bell but also other
equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device
Packing and shipping:
1.Electric parts and electric hoist packed by high quality plywood crate,
2.Other parts packed by Woven bag.
3.Shipped by Conatiners or Bulk Ship
Factory workshop:
FAQ about Mingdao cranes:1.Can the cranes be customized?
Yes,every customer's working condition is different, all of our products can be customized depend on customers' requirements.
Please give us the information as clear as you can, so we can give our best design to suit for your demands.
2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind
of operation way you need.
3.I have low headroom in my workshop, is it possible to install a crane in it?
We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.
4.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...
For Inquiry:
In order to offer the most suitable design solution for you, it will be great helpful if you can offer the following information to us:
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the rails? How long is it?
5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the drawing photo of your workshop.